租房买房买生意上iU91
查看: 7468|回复: 15
打印 上一主题 下一主题

[手机] 急问如何给Bell白色Modem解锁

[复制链接]   [推荐给好友]
跳转到指定楼层
楼主
发表于 2011-1-23 12:53 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
如题,朋友送了个Bell的白色2701 二合一Modem,但是如何才能解锁用呢?我现在用的是******的网络, Dry Loop. 请高人指点或者告知哪个地方能解锁?多少钱?

谢谢
2#
发表于 2011-1-29 21:35 | 只看该作者
多谢,thanks
回复 支持 反对

使用道具 举报

3#
发表于 2011-2-2 01:23 | 只看该作者
正需要,能否pm我密码,谢谢。
回复 支持 反对

使用道具 举报

4#
发表于 2011-2-2 18:05 | 只看该作者
不错,能否pm我密码,Thanks.
回复 支持 反对

使用道具 举报

5#
发表于 2011-2-3 16:33 | 只看该作者
需要,能否pm我密码,谢谢。
回复 支持 反对

使用道具 举报

6#
发表于 2011-2-5 23:36 | 只看该作者
友情提醒大家一下,这个破解固件是对白猫型号有限制的。

如果是非支持型号,可能会出现变砖的情况。

建议大家在破解之前,仔细阅读破解步骤说明和注意事项。
回复 支持 反对

使用道具 举报

7#
发表于 2011-2-12 10:52 | 只看该作者
Unlocking the Bell 2Wire 2701HG-G
1. Download the Singtel firmware (Direct Link: 2Wire 2701HG-G Singtel Firmware (1466)|Rapidshare)
2. Access your router’s firmware update page, I have listed all the possible web portal addresses that I have encountered, one of them SHOULD work for you. (http://gateway.2wire.net/tech/upgrade.html | http://192.168.2.1/tech/upgrade.html | http://192.168.1.254/tech/upgrade.html)
3. Select the Singtel 2sp file which you downloaded from above and click Update. (You should only do this through a wired connection and not wireless.)
4. Hopefully after a successful flash access the router’s Setup page (http://192.168.1.254/setup | http://192.168.2.1/setup | http://gateway.2wire.net/setup)
5.Enter this Key Code (5225-26P4-6262-22AS-B2E7) and click Advanced, now continue with the setup, and it will not append the @Singtel.com to the end of your B1 username. This is the only Key Code that worked for me as the others would fail even if we had the correct username/password combination. If this Key Code does not work for you check out all the rest of the Key Codes at the 2Wire website.
That is all, your Modem/Router should now connect to bell. The reason I wrote this tutorial, was because I saw that the information was scattered all over the forums, with a bit of correct information everywhere, and not all in one place. If I have made a mistake please point it out so I can fix this. Also I would hope that Bell and other ISPs find this post, and see how much users are frustrated with their branded hardware. Hopefully they will start using less restricted, and user changeable hardware/software. While it might be easier in the short run, I find that in the long run it is more costly, more annoying, and more problematic since there are such few firmware updates. Enjoy your unlocked/updated Modem/Router.
Ps. So far my friend’s iPad is working without a problem. Hopefully it stays that way.
回复 支持 反对

使用道具 举报

8#
发表于 2011-2-12 11:01 | 只看该作者
到这个网址,直接下载未加密码的解锁软件,以及说明,我搞好了。操作时,要网线连接,不能无线连接,切记!

http://www.kushari.org/2010/07/0 ... 01hg-g-modemrouter/
回复 支持 反对

使用道具 举报

9#
发表于 2011-3-1 16:42 | 只看该作者

to: qinqin82

您好,我也需要密码给白猫解锁。已经给您发了PM了。
谢谢!!!
回复 支持 反对

使用道具 举报

10#
发表于 2011-3-2 02:58 | 只看该作者

同問

哪位高手能解锁,(有线连接可以上,无线上网老是进入BELL登记网站)请联系
yoyochina88@hotmail.com 愿付费,谢谢
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 免费注册

本版积分规则

Copyright © 1999 - 2024 by Sinoquebec Media Inc. All Rights Reserved 未经许可不得摘抄  |  GMT-4, 2024-4-19 06:45 , Processed in 0.050290 second(s), 39 queries .